We are best Leading manufacturer of all steppar motor and Drive in Ahmedabad Gujarat India
Ideal Motor for CNC machines and other machinery. Standard NEMA42 frame size. 110Kgcm bipolar configuration motor. Works well with RMCS-1101 Stepper Drive at 5Amp configuration.
RMCS-1101 is Rhino Motion Controls high power micro-stepping drive for 1.8deg Bipolar Stepper Motors. It is designed for smooth and quiet operation without compromising on torque and control at higher speeds. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection and will survive accidental motor disconnects while powered-up.
The RMCS-1101 achieves micro-stepping using a synchronous PWM output drive and high precision current feedback and this is absolutely silent when the motor is stopped or turning slowly. It virtually eliminates stopped-motor heating regardless of power supply voltage.
The RMCS-1101’s closed-loop control gains are calibrated on start-up based on motor characteristics and also adjusted dynamically while the motor is in motion. This control algorithm makes it capable of achieving better torque at higher speeds in comparison to comparable drives in its range.
The PULSE/STEP, DIRECTION inputs are optically isolated. Both inputs work with 2.5V, 3.3V or 5V logic drive signals. The input drive current is 5mA at 2.5V so almost all logic family (74LS, 74HC, etc.) can be used to drive these inputs. Each input provides individual anode and cathode connections to the opto-isolator allowing for multiple input drive interfaces.
Features
Step Angle : 1.8 Degree
Configuration: 4 wire bipolar stepper motor
Holding Torque: 110kgcm bipolar mode
Phase current : 5.5Amp
Resistance/phase: 0.7ohm
Inductance/Phase : 9.85mH
Rotor inertia: 5500 gcm2
Length (L): 99mm
Shaft Dia : 19mm
Shaft Length : 55.37mm
Weight: 5000 grams
Micro-Stepping Drive Features
Smooth and quiet operation at all speeds and extremely low motor heating
Industrial grade performance for 2-Phase Bipolar, 4-Phase and Uni-polar Stepper Motors
Input supply voltage from 18VDc to 80VDC
Selectable peak coil current from 1A to 7A
Inaudible 200kHz current chopping frequency
Selectable half-current during motor standstill to further reduce motor heating
Selectable micro-steps up to 20000 steps per rotation for a 1.8deg stepper motor
Higher motor torque and higher speeds achievable due to advanced loop control algorithm
2.5V, 3.3V and 5V compatible PULSE and DIRECTION inputs with 2-wire opto-isolated interface
Short-circuit protection for the motor outputs, over-voltage and under-voltage protection
LED indication for power and error states